Skip to content 
THERMACOTE
ThermaCote is an advanced thermal insulation system designed for demanding environments.
Applied by spray or manually, it forms a continuous, high-performance barrier that reduces heat loss, limits condensation, and improves the energy efficiency of facilities.
Developed to withstand extreme conditions, ThermaCote provides long-lasting surface protection while optimizing thermal comfort and operational performance.
01 | Versatile Surface Adhesion
Adheres effectively to metal, concrete, and prepared industrial surfaces, ensuring long-lasting performance even in mining environments.
02 | Controlled drying and efficient application
Optimized drying time allows for uniform application and rapid commissioning depending on site conditions.
03 | Stable thermal performance
Reduces heat transfer and maintains its insulating properties despite temperature fluctuations.
04 | Seamless, continuous membrane
Applied in a uniform layer to form a monolithic thermal barrier with no thermal bridges or weak points.
05 | Low VOC Content
A formulation with low emissions of volatile organic compounds, contributing to a safer work environment.
06 | Increased Strength and Durability
Protects against moisture, condensation, and environmental stresses, while ensuring a long service life.
TECHNICAL SPECIFICATIONS
- 🔹 Mechanical Properties 392N (MD), 400N (XD)
- Tensile strength: ~66.7 psi
- Elongation (elasticity): ~65%
- Adhesion (cross-hatch): 100%
- 🔹 Thermal properties
- Thermal conductivity (λ): 0.0345 W/m·K
- Measured energy savings: up to 38
- Solar Reflectance Index (SRI): up to 104
- Emissivity: ~0.88
- 🔹 Physical properties
- Density: ~0.41 g/cm³ ~0.41 g/cm³
- Viscosity: 2,000 – 10,000 cps
- Volume solids: ~80%
- Recommended thickness: ~0.5 mm total
- 🔹 Permeability & moisture
- Water vapor transmission: ~0.0755 perms
- Air permeability: extremely low (virtually impermeable)
- Effect: breathable membrane (allows moisture to escape)
- 🔹 Strength & durability
- Fire resistance: Class A / Flame spread 0
- Smoke development: 5
- Salt spray test: 1,500 hours without degradation
- Accelerated aging: Passed
- 🔹 Physical Properties
- Density: ~0.41 g/cm³
- Viscosity: 2,000 – 10,000 cps
- Volume solids: ~80%
- Recommended thickness: ~0.5 mm total
- 🔹 Permeability & Moisture
- Water vapor transmission: ~0.0755 perms
- Air permeability: extremely low (virtually impermeable)
- Effect: breathable membrane (allows moisture to escape)
- 🔹 Strength & durability
- Fire resistance: Class A / Flame spread 0
- Smoke development: 5
- Salt spray test: 1,500 hours without degradation
- Accelerated aging: Passed
- 🔹 Temperature & application
- Surface application temperature: up to 149°C (300°F)
- With specialized training: up to ~204°C
- Drying time: 1 to 2 hours
- 🔹 Environment & Safety
- VOC (volatile organic compounds): ~5.3 g/L (very low)
- pH: 8.5 – 9.5
- Non-flammable
